Cangzhou Steel Pipe Group (CSPG) Co., Ltd.

• Product Description

Outside Dia (mm): 20-219mm Wall Thickness (mm): 0.5mm-2.5mm
SCH30, SCH40, STD, XS, SCH80, SCH160, XXS etc Length: Less Than 12m Steel material: Q195 → Grade B, SS330, SPHC, S185 Surface Treatment: Oiled, Varnished, Black Painted Standard GB/T3091-1993, GB/T3092-1993, EN39, S355J2H, S275J2H, ST37, ST52, ASTM A106, ASTM A53BS1387, API 5L

• Product Details

Cold-Drawn Carbon Steel Pipe The cold-drawn carbon steel pipe is designed with high dimensional accuracy that the tolerance of inner and outer diameter size can be accurate to within 0.05mm, and the better tolerance can be controlled within 0.025mm.
It is widely used for the industrial application, such as oil, gas and the heat exchanger owing to its resistance to high temperature.

• Brief Introduction

Cold-Drawn Carbon Steel Pipe

Product name	Material	Standard	Size (mm)	Application
Low temperature tube	16MnDG 10MnDG 09DG 09Mn2VDG 06Ni3MoDG ASTM	GB / T18984-2003, ASTM A333	OD: 8-1240 * WT: 1-200	Apply to 45℃ ~ 195℃ low temperature pressure vessel and low temperature heat exchanger pipe
High-pressure boiler tube	20G ASTMA106B ASTMA210A ST45.8-III	GB5310-1995 ASTM SA106 ASTM SA210 DIN17175-79	OD: 8-1240 * WT: 1-200	Suitable for manufacturing high pressure boiler tube, header, steam pipe, etc
Petroleum cracking tube	10, 20	GB9948-2006	OD: 8-630 * WT: 1-60	Used in oil refinery furnace tube, heat exchanger tube
Low medium pressure boiler tube	10#, 20#, 16Mn, Q345	GB3087-2008	OD: 8-1240 * WT: 1-200	Suitable for manufacturing various structure of low and medium pressure boiler and locomotive boiler
General structure of the tube	10#, 20#, 45#, 27SiMn, ASTM A53A,B 16Mn, Q345	GB / T8162-2008, GB / T17396-1998, ASTM A53	OD: 8-1240 * WT: 1-200	Apply to the general structure, engineering support, mechanical processing, etc
Oil casing	J55, K55, N80, L80, C90, C95, P110	API SPEC 5CT ISO11960	OD: 60-508 * WT: 4.24-16.13	Used for extraction of oil or gas in oil Wells casing, used in oil and gas well sidewall

The cold-drawn carbon steel pipe is designed with high dimensional accuracy that the tolerance of inner and outer diameter size can be accurate to within 0.05mm, and the better tolerance can be controlled within 0.025mm.

Made of high quality carbon steel, it is capable of  withstanding high pressure, cold bending abd flaring flattening, without cracking.

Excellent overall performance, it can make a variety of complex deformation and machining with simple process that you will gain the suitable one.

With good treatment on the surface, it has smooth surface with no oxide layer with the resistant to oxygen, water as well as corruption, which can greatly extend its service life.

It is endurable that it can be used over and over again, which is quite cost effective.

The cold-drawn carbon steel pipe is manufactured with strict standards to make sure that it has premium quality which is able to provide excellent performance.

It is widely used for the industrial application, such as oil, gas and the heat exchanger owing to its resistance to high temperature.